Performances and limitations of the HRMS method for dioxins, furans and dioxin-like PCBs analysis in animal feedingstuffs: Part I: Results of an inter-laboratory study

The European strategy for dioxin monitoring of the food chain has defined high-resolution gas chromatography coupled to high-resolution mass spectrometry (HRGC/HRMS) method as the confirmatory method that can provide reliable and comparable results at sub-parts per trillion (ppt) level. This paper describes the first inter-laboratory study on dioxins, furans and dioxin-like PCBs by HRGC/HRMS method in animal feedingstuffs. Two different statistical approaches (ISO 5725 and Cofino’s statistics) were used for the statistical evaluation. For this particular study, the performances of the HRGC/HRMS method seem to be congener-independent in repeatability and reproducibility conditions over a concentration range covering more than four orders of magnitude. Results clearly show the effect of precision loss below 0.1 ppt level per congener in repeatability conditions and below 0.2 ppt level per congener in reproducibility conditions. LODs reported by the laboratories give median values of 0.02 ng/kg for most of the toxic congeners. Relative standard deviation between the laboratories’ mean values using upper-bound approach for TEQ calculation is 6.2%, more than twice the maximum level set at 0.75 ng TEQ/kg of product.     

Comprehensive two-dimensional gas chromatography with isotope dilution time-of-flight mass spectrometry for the measurement of dioxins and polychlorinated biphenyls in foodstuffs. Comparison with other methods

A comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (GC x GC-TOF-MS) experimental setup was tested for the measurement of seven 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs), ten 2,3,7,8-substituted polychlorinated dibenzofurans (PCDFs), four non-ortho-polychlorinated biphenyls (PCBs), eight mono-ortho-PCBs, and six indicator PCBs (Aroclor 1260) in foodstuff samples. A 40m RTX-500 (0.18mm I.D., 0.10 microm df) was used as the first dimension (1D) and a 1.5 m BPX-50 (0.10mm I.D., 0.10 microm df) as the second dimension (2D). The GC x GC chromatographic separation was completed in 45 min. Quantification was performed using 13C-label isotope dilution (ID). Isotope ratios of the selected quantification ions were checked against theoretical values prior to peak assignment and quantification. The dynamic working range spanned three orders of magnitude. The lowest detectable amount of 2,3,7,8-TCDD was 0.2 pg. Fish, pork, and milk samples were considered. On a congener basis, the GC x GC-ID-TOF-MS method was compared to the reference GC-ID high resolution mass spectrometry (HRMS) method and to the alternative GC-ID tandem-in-time quadrupole ion storage mass spectrometry (QIST-MS/MS). PCB levels ranged from low picogram (pg) to low nanogram (ng) per gram of sample and data compared very well between the different methods. For all matrices, PCDD/Fs were at a low pg level (0.05-3 pg) on a fresh weight basis. Although congener profiles were accurately described, RSDs of GC x GC-ID-TOF-MS and GC-QIST-MS/MS were much higher than for GC-ID-HRMS, especially for low level pork and milk. On a toxic equivalent (TEQ) basis, all methods, including the dioxin-responsive chemically activated luciferase gene expression (DR-CALUX) assay, produced similar responses. A cost comparison is also presented.     

A Convenient Procedure for N-Amination of 4-OXO-1,4-Dihydroquinolines

A high yielding N-amination of quinolones at low temperature via the use of O-mesitylenesulfonylhydroxylamine is reported.     

LiFePO<Subscript>4</Subscript> synthesized via melt synthesis using low-cost iron precursors

LiFePO₄/C material has been prepared using fast-melt synthesis method followed by grinding and carbon coating. The low-cost iron ore concentrate (IOC) and purified iron ore concentrate (IOP) were used as iron precursors in the melt process to reduce significantly the cost of LiFePO₄/C. The same product was also synthesized using pure Fe₂O₃ under similar conditions as reference. The physical-chemical and electrochemical properties of samples were investigated. The X-ray Diffraction (XRD) results confirm the formation of an olivine structure of LiFePO₄ with a minor amount of Li₃PO₄ and Li₄P₂O₇ impurities for all the samples but no Fe₂P. The power performances of LiFePO₄/C using low-cost iron precursors were close to the sample using pure Fe₂O₃ precursor although capacity in mAh g^?1 is somewhat lower. With the inherent presence of silicon and other metals species, multi-substitution may take place when using IOC as source of iron leading to a Li(Fe_1-yM_y)(P_1-xSi_x)O₄ general composition. Multi-substitution, however, allows a better cycling stability. Therefore, these iron precursors present a promising option in this field to reduce the cost of a large-scale synthesis of LiFePO₄/C for Li-ion batteries application.     

Acid-Catalyzed E-Ring Expansion and Isomerization of 3-Acetylbetulin: Synthesis of Cytotoxic Anhydrobetulin Saponins

22(17 → 28)abeo-Lupene derivatives 5a and 6a were obtained after the acid-catalyzed E-ring expansion of 3-acetylbetulin (1a). Glycosylation of these dehydrated triterpenoids using Schmidt's trichloroacetimidate sugar donors in the presence of trimethylsilyl trifluoromethanesulfonate (TMSOTf) provided the new anhydrobetulin saponins 7b–7e in which the terminal olefin C-20(29) isomerizes to form a C-19 tetrasubstituted alkene. The preliminary cytotoxic evaluation revealed that saponins 7b–7d exhibited a moderate cytotoxic activity against A549, DLD-1, and WS1 human cell lines with IC₅₀ ranging from 22 to 49 μM.     

Polypropylene/Cellulosic Fiber Composites Chemical Treatment of the Cellulose Assuming Compatibilization Between the Two Materials

Abstract

The present work deals with the realization of composites with a polypropylene (PP) matrix and cellulosic fibers as reinforcement. In order to achieve a good adhesion with the PP matrix, the modification of different cellulosic fibers has been performed with various chemical functions: carboxylic anhydrides, isocyanates, vinylsulfone, and chlorotriazine systems. All these compatibilizing agents carry an alkyl chain or a PP chain. Grafting is evidenced by infrared and ESCA spectroscopies, and the grafting rates for the different chemicals are determined by microweighing measurements. Modification of the surface characteristics is followed by wettability tests and inverse gas chromatography. Determination of the water sorption isotherm for the treated fibers shows an important decrease in water regain in the case of isocyanate treatments in swelling medium. Enhancement of adhesion between fibers and the matrix is demonstrated by mechanical tests: the interfacial shear stress obtained by the microbond test increases by 70% for cellulosic fibers treated with maleated PP. This may be the result of entanglements between PP chains, but for macrocomposites the effect is much more limited due to the predominance of external factors during development of the composite.     

Macrocyclic 14-Membered Ring Diketal Dilactams: Evaluation of their Divalent Cation Binding Properties

The binding abilities of a new class of 14-membered ring ligands bearing diketal dilactam functions were explored by UV-visible spectrophotometry. Their formation constants, determined in THF solution, showed appreciable complexation with divalent cations (stability order: Sr²⁺≥Ca²⁺>Zn²⁺≥Mg²⁺>Ba²⁺) whereas no association was observed with monovalent cations. The stoichiometry of the complexes formed was essentially 1:1 although sometimes a low percentage (<10%) of 1:2 (cation–ligand) species was detected. The corresponding formation constants determined by computation (STAR program) were in the range 1.5<log?β ¹¹<4.8 and 4.4<log?β ¹²<7.1. They depend significantly on the nature of the substituents. In addition, solvent extractions carried out in a water–chloroform system showed the highest constants (log K ^ex) for the most substituted macrocycles 7b and 7c (norephedrine series) with a lipophilic skeleton.